General Information
Manufacturer	Tripp Lite
Manufacturer Part Number	SMART3000RM2U
Manufacturer Website Address	http://www.tripplite.com
Brand Name	Tripp Lite
Product Line	SmartPro
Product Name	SMART3000RM2U UPS System
Product Type	Line-interactive UPS
Technical Information
Plug/Connector Type	NEMA L5-30P
Receptacles	1 x NEMA 5-20R
Receptacles	4 x NEMA L5-30R
Receptacles	4 x NEMA 5-15R
Protection Type	Under Voltage
Protection Type	Over Voltage
Emergency Power OFF	Yes
Cord Length	10 ft
Power Description
Load Capacity (VA)	3 kVA
Load Capacity (Watt)	2.25 kW
Input Voltage	110 V AC
Output Voltage	120 V AC
Input Current	24 A
Waveform Type	Sine Wave
Management
Network Management	SNMP Manageable
Alarm	Overload
Alarm	Low Battery
Alarm	On Battery
Controls/Indicators
Status Indicators	5 Front Panel Leds: Green Power Led Green Voltage Correction Led 3 Color Battery Charge Led 3 Color Output Load Led Red Battery Warning Led
Interfaces/Ports
USB	Yes
Battery Information
Backup/Run Time (Full Load)	3.50 Minute
Backup/Run Time (Half Load)	10 Minute
Maximum Battery Recharge Time	4.50 Hour
Hot Swappable	Yes
Environmental Conditions
Temperature	104°F (40°C)
Physical Characteristics
Height	3.5"
Width	17.5"
Depth	19"
Rack Height	2U
Weight (Approximate)	64 lb
Miscellaneous
Package Contents	SMART3000RM2U UPS System Poweralert Software With Usb, Serial & Epo Cabling 4 x Post Rackmount Installation Kit Instruction Manual
Certifications & Standards	UL1778 (USA) CSA (Canada) NOM (Mexico) FCC Part 15 Category A (EMI)
Software Included	PowerAlert Software
Recycled	No
Green Compliant	Yes
Green Compliance Certificate/Authority	ENERGY STAR
Green Compliance Certificate/Authority	RoHS
Country of Origin	China
Warranty
Limited Warranty	2 Year Limited

General Information
Power Rating	3000 VA
Output Voltage Rating	120 V
Number of Outputs	9
Runtime-Full Load	4 min
Runtime-Half Load	13 min

Tripp Lite's SmartPro 3000 Rackmount (2U) UPS System provides intelligent, line-interactive battery backup with expandable runtime via optional external battery packs for networking equipment and servers. 3,000VA power capacity allows you to work through short blackouts or safely shut down during longer ones. The unit has 9 AVR protected outlets (3 pairs of remote control outlets), an accessory slot, and diagnostic LEDs. It also features 2 built-in serial ports and 2 built-in USB ports that work with PowerAlert Software to provide simultaneous automatic unattended shutdown of multiple systems. Tripp Lite's PowerAlert Software is the only UPS software capable of managing every type and brand of UPS on your network, from every manufacturer. $50,000 Ultimate Lifetime Insurance covers connected equipment.

Key Buying Points:

3,000VA output power rating (2,250 watts)

Battery run time: 13 minutes half load / 4 minutes full load, expandable with external battery packs

Innovative design makes unit adaptable for rackmount, wall-mount, and tower applications

Rackmount fits standard 19-in. rack (2U rack space)

9 AVR protected outlets (6 NEMA 5-15, 2 NEMA 5-15/20, NEMA L5-30) (3 pairs of remote control outlets); 10-ft. cord (NEMA L5-30 plug)

Line-interactive with 4 levels of automatic voltage regulation (AVR)

AVR adjusts incoming voltage to 120 volt output level without using battery power

3 Pairs of remote control outlets can be powered off and back on via PowerAlert Software interface, enabling you to reboot a locked-up device, or to shed load in order to provide longer UPS runtime to other devices

2 DB9 serial ports and 2 USB ports to manage multiple network servers simultaneously; SNMP compatible

Accessory slot for use with optional SNMP card, network management, and connectivity products

PowerAlert unattended shutdown software and network cables included

PowerAlert Software compatible with every brand of UPS, from every manufacturer

Complete surge protection and EMI/RFI noise filtering

$50,000 Ultimate Lifetime Insurance covers connected equipment

Diagnostic LEDs (indicate 17 performance conditions)

Hot-swap battery replacement

External battery capability

Emergency Power Off (EPO) port for connection of UPS to user-supplied switch to enable emergency shutdown; connection cable included

Optional black front panel included

Mounting hardware included

Typical Applications:

Corporate and departmental servers, UNIX servers/workstations, hubs/routers/gateways/bridges, CAD/CAM/CAE workstations, network workstations, network file servers, and more.

Package Includes:

SmartPro 3000 Rackmount (2U) UPS System

PowerAlert Software, (2) 6-ft. DB9 cables, and (2) 6-ft. USB cables

12-ft. EPO connection cable

Optional black front panel

Mounting hardware

Instruction manual with warranty information

Download DataSheet