Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 96% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB, RS-232 and optional SNMPWEBCARD network interface. HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. Includes PowerAlert monitoring software and complete cabling. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.

More from the Manufacturer

General Information
Manufacturer	Tripp Lite
Manufacturer Part Number	SMART2200RMXL2U
Manufacturer Website Address	http://www.tripplite.com
Brand Name	Tripp Lite
Product Line	SmartPro
Product Name	SMART2200RMXL2U UPS System
Product Type	Line-interactive UPS
Technical Information
Plug/Connector Type	NEMA 5-20P
Receptacles	4 x NEMA 5-20R
Receptacles	4 x NEMA 5-15R
Protection Type	Under Voltage
Protection Type	Over Voltage
Emergency Power OFF	Yes
Cord Length	10 ft
Power Description
Load Capacity (VA)	2.20 kVA
Load Capacity (Watt)	1.60 kW
Input Voltage	110 V AC
Output Voltage	120 V AC
Output Voltage	110 V AC
Waveform Type	Sine Wave
Management
Network Management	SNMP Manageable
Alarm	Overload
Alarm	Low Battery
Alarm	On Battery
Controls/Indicators
Status Indicators	5 Front Panel Leds: Green Power Led Green Voltage Correction Led 3 Color Battery Charge Led 3 Color Output Load Led Red Battery Warning Led
Interfaces/Ports
Serial Port	Yes
USB	Yes
Battery Information
Backup/Run Time (Full Load)	6 Minute
Backup/Run Time (Half Load)	16 Minute
Maximum Battery Recharge Time	4.50 Hour
Hot Swappable	Yes
Environmental Conditions
Temperature	104°F (40°C)
Physical Characteristics
Height	3.5"
Width	17.5"
Depth	19"
Rack Height	2U
Weight (Approximate)	64 lb
Miscellaneous
Package Contents	SMART2200RMXL2U UPS System Poweralert Software CD-ROM USB, Serial And EPO Cabling Owner's Manual
Certifications & Standards	UL1778 (USA) CSA (Canada) NOM (Mexico) FCC Part 15 Category A (EMI)
Recycled	No
Green Compliant	Yes
Green Compliance Certificate/Authority	RoHS
Country of Origin	China
Warranty
Limited Warranty	2 Year Limited

General Information
Power Rating	2200 VA
Output Voltage Rating	120 V
Number of Outputs	8
Runtime-Full Load	6 min
Runtime-Half Load	16 min

Tripp Lite's SMART2200RMXL2U intelligent, line interactive UPS protects server, networking and telecommunications equipment from blackouts, voltage fluctuations and transient surges in a compact tower / rackmount housing. UPS system occupies only 2 rack spaces (2U) in any 2 or 4 post 19 inch rackmount application with a maximum depth of only 14.1 inches. Also supports upright tower use with 2USTAND accessory. Large capacity 2200VA/1600 watt maximum rated UPS system offers 8 minutes runtime at full load and 20 minutes at half load during power failures. Runtime is further expandable with the addition of BP48V242U or BP48V60RT3U external battery packs. Line interactive voltage regulation corrects brownouts as low as 75v and overvoltages as high as 147v to fully regulated 120v nominal output for smooth continuous operation of connected equipment. Includes a total of 8 outlets, 3 pairs of which can be individually powered off and back on via software interface to selectively reboot remote equipment or shed less critical loads to extend battery runtime for more critical loads. Battery runtime can be extended with external rackmount battery packs. Includes slot for internal SNMP/web card, plus 2 DB9 and 2 USB enhanced monitoring ports for unattended shutdown, remote control and monitoring of UPS system and power data. Ships in attractive gray color scheme with optional use black front bezel to alter UPS appearance to match black color rackmount equipment. Compatible with Tripp Lite's PowerAlert and Watchdog service software. 2 year warranty. $50,000 connected equipment insurance.

Typical Applications:
Ideal for protection of sensitive electronics in any application calling for upright tower or 19 inch rackmount UPS protection. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systemsPackage

Includes:
SMART2200RMXL2U UPS System
PowerAlert Software and cabling
Mounting hardware
Warranty information
Instruction manual

Download DataSheet

Similar Products: