General Information
Manufacturer	Tripp Lite
Manufacturer Part Number	N506-02M
Manufacturer Website Address	http://www.tripplite.com
Brand Name	Tripp Lite
Product Name	Fibre Channel Patch Cable
Product Type	Network Cable
Technical Information
Cable Type	Fiber Optic
Cable Characteristic	Patch Cable
Core/Cladding Diameter	50/125 µm
Cable Length	6.56 ft
Connector on First End	2 x SC Male
Connector on Second End	2 x SC Male
Jacket Type	Plenum
Physical Characteristics
Color	Orange
Miscellaneous
Package Contents	Fibre Channel Patch Cable 2M duplex MMF cable SC/SC 50/125 fiber
Additional Information	Number of fibers: 2 Fiber type: all glass graded index Core diameter: two 50+/-3 microns CLAD diameter: 125+/-2 microns Primary coating diameter: 245+/-15 microns Secondary coating diameter: 900+/-50 microns Attenuation @850NM: 3.5DB/KM maximum, @1300NM: 1.0DB/KM maximum Bandwidth @850NM: 220 MHz-KM minimum, @1300NM: 600 MHz-KM minimum Numeric apeture: .275 nominal Proof test level: 100,000 PSI Insertion loss testing performed on every connector (0.2db typical) and provided with cable Beveled edge on ends of glass makes insertion of plug a breeze
Certifications & Standards	FDDI OFNR
Warranty
Limited Warranty	Lifetime

•  2M duplex MMF Cable SC/SC 50/125 Fiber

For any fiber optic hardware or NIC card requiring multimode duplex cable with SC/SC connectors
Tripp Lite's 2-meter multimode duplex fibre channel SC/SC patch cable is manufactured from 50/125 zipcord fiber. The cable has SC connectors on each end, a PVC jacket and is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in fiber and fibre channel applications. It is backward compatible with 62.5 micron fiber and built-in headroom for future applications. The cable provides higher bandwidth optimized for Gigabit and 10Gbps networks. Tripp Lite warrants this product to be free from defects in materials and workmanship for life.

Key Buying Points:
Constructed with 50/125 micron cable
Length - 2M
Use on fiber and fibre channel installations
SC male to SC male connectors
Higher bandwidth optimized for gigabit and 10Gbps networks
Backward compatible with 62.5 micron fiber
Built-in headroom for future applications
Number of fibers: 2
Fiber type: all glass graded index
Core diameter: two 50+/-3 microns
CLAD diameter: 125+/-2 microns
Primary coating diameter: 245+/-15 microns
Primary coating material: acrylate
Secondary coating diameter: 900+/-50 microns
Secondary coating material: PVC
Attenuation @850NM: 3.5DB/KM maximum, @1300NM: 1.0DB/KM maximum
Bandwidth @850NM: 220MHz-KM minimum, @1300NM: 600MHz-KM minimum
Numeric apeture: .275 nominal
Proof test level: 100,000 PSI
Insertion loss testing performed on every connector (0.2db typical) and provided with cable
Beveled edge on ends of glass makes insertion of plug a breeze
Tripp Lite warrants this product to be free from defects in materials and workmanship for life