The TCC-80/80I provides complete signal conversion between RS-232 and RS-422/485, without requiring an external power source. It supports both half duplex 2-wire RS-485 and full duplex 4-wire RS-422/485, either of which can be converted between RS-232's TxD and RxD lines. In addition,the TCC-80/80I's 15 KV ESD protection guards against damage from electrostatic discharge. The TCC-80I is the world's first high-speed, port-powered converter with 2.5 KV isolation.
Automatic data direction control is also provided for RS-485, in
which the RS-485 driver is enabled automatically when the circuitry
senses the TxD output from the RS-232 signal. This means that no
programming effort is required to control the transmission direction of
the RS-485 signal. Moreover, the TCC-80I patented LED port power
indicator can let you check if TCC-80I is receiving enough power or
not.
Serial Communication | |
Optical Isolation Protection | 2.5 KV rms for 1 minute (TCC-80I only) |
RS-232 Side | |
Connector(s) | DB9 female |
Signals | RS-232: TxD, RxD,
RTS, CTS, DTR, DSR, DCD, GND (Loop-back wiring: RTS to CTS, DTR to DSR and DCD) |
RS-422/485 Side | |
Connector(s) | Terminal Block or DB9 male |
Signals | (interface
selected by DIP switch) RS-422: TxD+, TxD-, RxD+, RxD-, GND RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND RS-485-2w Signals: Data+, Data-, GND |
RS-485 Data Direction Control | ADDC® (automatic data direction control) |
Serial Transmission | |
Baudrate | 300 bps to 115.2 Kbps |
ESD Protection | 15 KV |
Pull High Resistance | 1k ohm |
Pull Low Resistance | 150k ohm |
Physical Characteristics | |
Enclosure | ABS + PC |
Dimensions | 42 x 80 x 22 mm (1.65 x 3.15 x 0.87 in) |
Environmental Limits | |
Operating Temperature | 0 to 60°C (32 to 140°F) |
Operating Humidity | 5 to 95% RH |
Storage Temperature | -20 to 75°C (-14 to 167°F) |
Power Requirements | |
Source of Input Power | RS-232 port (TxD, RTS, DTR) or power input jack |
Input Voltage | 5 to 12 VDC |
Power Consumption | TCC-80: 10 mA @ 5
V (with termination disabled) TCC-80I: 20 mA @ 5 V (with termination disabled) |
Surge Protection | Embedded 15 KV ESD Surge Protection |
Regulatory Approvals | |
CE | Class B |
FCC | Class B |
Warranty | |
Warranty Period | 5 years |