MOXA Active Ethernet I/O with 4 analog inputs and 12 configurable DIOs
Share this page:
Product IDs: ITEM #: 709398 Mfg Part #: ioLogik E2242   Availability: In Stock Ground Shipping: $11.00 Qty: * MSRP: $625.00 For Dealer, Reseller, and Volume Pricing, Please Contact Our Industrial Sales Staff 1-877-235-6628 Option 2 Qty: Add item to cart to view expected arrival date. Sales tax will be collected for CA,MA customers. If the lead time is more than 3 business days, we will contact you for updated information. Product Condition: Brand new sealed with full manufacturer warranty unless otherwise specified.

	Overview		DataSheet
Active Ethernet I/O with 4 analog inputs and 12 configurable DIO Better I/O matrix for monitoring  Moxa's ioLogik E2242 is tailor made for use with remote monitoring and alarm systems. This Active Ethernet I/O product provides 4 analog inputs and 12 configurable DIOs in the same product. The 1:3 ratio of analog to digital IOs is perfectly adapted for water tank monitoring and environmental monitoring applications, in which 1 analog input is used to trigger 3 digital outputs as High-High, High, and Low alarms. Moxa's ioLogik E2242 lets you set up your monitoring system without the need for a local PC or RTU. Features and Benefits 4 fixed differential analog input channels 12 configurable digital input/output channels Instant event messaging by TCP, UDP, e-mail, SNMP Trap PC-based configuration utility and web console Easy-to-use Click&Go™ Logic for local output control I/O control over Modbus/TCP and SNMP protocol NIST traceable calibration Specifications   LAN: Ethernet 10/100Mbps, RJ45 Protection 1.5KV magnetic isolation Protocols Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP(MIB for I/O and Network), HTTP, SNTP   Serial: Interface RS-485-2w: Data+, Data-, GND Serial Line Protection 15KV ESD for all signals   Serial Communication Parameters: Data Bits 8 Stop Bits 1 Parity None Flow Control None Protocols Modbus/RTU Speed 1200 to 115200 bps   Digital Input: Sensor Type NPN, PNP I/O Mode DI or event counter (up to 900 Hz) Dry Contact Logic 0: short to GND Logic 0: Open Wet Contact Logic 0: 0 to 3 VDC Logic 1: 10 to 30 VDC Common Type 6 points per COM Power Off Storage for Counter Mode Yes   Digital Output: Sensor Type Sink, 36 VDC, 200 mA Pulse Wave Width 10 ms /100 Hz   Configurable Digital Input/Output Channels: Channels 12 points   Analog Input: Resolution 16-bit Accuracy ±0.1% FSR @ 25?C, ±0.3% FSR @ -10 and 60?C Sampling Rate (all channels) 100 samples/sec Input Impedence 200K ohms (min.) Built-in Resistor for Current Input 102 ohms Channels 4, differential input   Physical Characteristics: Wiring I/O cable max. 14AWG   Environmental Limits: Operating Temperature -10 to 60°C (14 to 140°F) Storage Temperature -40 to 85°C (-40 to 185°F) Ambient Relative Humidity 5 to 95% (non-condensing)   Power Requirements: Power Input 24 VDC nominal, 12 to 48 VDC DO Power 24 VDC nominal, up to 30 VDC   Agency Approvals: EMI FCC Part 15, CISPR (EN55022) class A EMS IEC 61000-4, IEC 61000-6 Safety UL508 Shock IEC 60068-2-27 Freefall IEC 60068-2-32 Vibration IEC 60068-2-6 Specification Power Requirements Power Consumption 178 mA @ 24 VDC Power Input 24 VDC nominal, 12 to 36 VDC Serial Communication Parameters Flow Control None Protocol Modbus/RTU Data Bits 8 Parity None Stop Bits 1 Baudrate 1200 to 115200 bps Analog Input Type Differential input Input Impedance 200K ohms (min.) Built-in Resistor for Current Input 120 ohms Resolution 16 bits Input Range ±150 mV, 0 to 150 mV, ±500 V, 0 to 500 mV, ±5 V, 0 to 5 V, ±10 V, 0 to 10 V, 0 to 20 mA, 4 to 20 mA Sampling Rate (all channels) 100 samples/sec Accuracy ±0.1% FSR @ 25°C ±0.3% FSR @ -10 and 60°C I/O Mode Voltage / Current Inputs and Outputs Analog Inputs 4 channels Configurable DIOs 12 channels LAN Protection 1.5 KV magnetic isolation Ethernet 1 x 10/100 Mbps, RJ45 Protocols Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP, HTTP, CGI, SNTP Digital Input Isolation 3K VDC or 2K Vrms Poweroff Counter Supports poweroff counter storage function Common Type 6 points per COM Over-voltage Protection 36 VDC Digital Filtering Time Interval Software selectable Dry Contact • On: short to GND • Off: Open Wet Contact • On: 0 to 3 VDC • Off: 10 to 30 VDC Counter Frequency 900 Hz, power off storage I/O Mode DI or event counter Sensor Type Wet Contact (NPN or PNP) and Dry Contact Environmental Limits Operating Temperature -10 to 60°C (14 to 140°F) Storage Temperature -40 to 85°C (-40 to 185°F) Ambient Relative Humidity 5 to 95% (non-condensing) Physical Characteristics Weight under 250 g Dimensions 115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in) Wiring I/O cable max. 14 AWG Standards and Certifications EMI FCC Part 15 Subpart B Class A, EN 55022 Class A Safety UL 508 Shock IEC 60068-2-27 Vibration IEC 60068-2-6 EMS IEC 61000-4, IEC 61000-6 Freefall IEC 60068-2-32 Digital Output Type Sink Isolation 2K Vrms or 3K VDC (Magnetic) Pulse Output Frequency 1 kHz Over-temperature Shutdown 175°C (min.) Over-voltage Protection 45 VDC Current Rating 200 mA per channel I/O Mode DO or Pulse Output Over-current Protection 2.6 A (4 channels @ 650 mA) Serial Communication Interface RS-485-2w: Data+, Data-, GND Serial Line Protection 15 KV ESD for all signals MTBF (mean time between failure) Time 204,391 hrs Database Telcordia (Bellcore) Warranty Warranty Period 5 years Details See www.moxa.com/warranty