General Information
Manufacturer	Tripp Lite
Manufacturer Part Number	N520-50M
Manufacturer Website Address	http://www.tripplite.com
Brand Name	Tripp Lite
Product Name	Duplex Fiber Optic Patch Cable
Product Type	Network Cable
Technical Information
Cable Type	Fiber Optic
Cable Characteristic	Patch Cable
Cable Length	164.04 ft
Connector on First End	2 x LC Male
Connector on Second End	2 x LC Male
Jacket Type	Plenum
Miscellaneous
Package Contents	Duplex Fiber Optic Patch Cable 50M Duplex MMF Cable LC/LC 50/125 Fiber
Additional Information	Fiber type: all glass graded index Core diameter: two 50+/-3 microns CLAD diameter: 125+/-2 microns Primary coating diameter: 245+/-15 microns Primary coating material: acrylate Secondary coating diameter: 900+/-50 microns Attenuation @850NM: 3.5DB/KM maximum, @1300NM: 1.0DB/KM maximum Bandwidth @850NM: 220 MHz-KM minimum, @1300NM: 600 MHz-KM minimum Numeric apeture: .275 nominal Proof test level: 100,000 PSI Insertion loss testing performed on every connector (0.2db typical) and provided with cable
Certifications & Standards	FDDI
Warranty
Limited Warranty	Lifetime

General Information
Mode	-
Port Type	-
Application	-
Connector End A	-
Connector End B	-
Cable Type	-
Fiber Diameter	-
Length	-
Number of Fibers	-
Ferrule Material	-

•  50M Duplex MMF LC/LC 50/125 Fiber Cable

Multimode Duplex (50µ/125) Fibre Channel Patch Cable
Tripp Lite's 50-meter multimode duplex fiber channel LC/LC patch cable is manufactured from 50/125 zipcord fiber. The cable has LC connectors on each end. It has a PVC jacket and is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in fiber and fiber channel applications. It is backward compatible with 62.5-micron fiber and built-in headroom for future applications. The cable provides higher bandwidth optimized for Gigabit and 10Gbps networks.

Key Buying Points:
Constructed with 50/125 micron cable
Length - 50M
Use on fiber and fibre channel installations
LC male to LC male connectors
Higher bandwidth optimized for gigabit and 10Gbps networks
Backward compatible with 62.5 micron fiber
Built-in headroom for future applications
Number of fibers: 2
Fiber type: all glass graded index
Core diameter: two 50+/-3 microns
CLAD diameter: 125+/-2 microns
Primary coating diameter: 245+/-15 microns
Primary coating material: acrylate
Secondary coating diameter: 900+/-50 microns
Secondary coating material: PVC
Attenuation @850NM: 3.5DB/KM maximum, @1300NM: 1.0DB/KM maximum
Bandwidth @850NM: 220 MHz-KM minimum, @1300NM: 600 MHz-KM minimum
Numeric apeture: .275 nominal
Proof test level: 100,000 PSI
Insertion loss testing performed on every connector (0.2db typical) and provided with cable
Beveled edge on ends of glass makes insertion of plug a breeze
Tripp Lite warrants this product to be free from defects in materials and workmanship for life